1.1. 1. Open CMTS Setup Page
Go to Provisioining –> CMTS
See the "Assigned Config" –> "Setup"
Follow Setup Instructions for a first default config
1.2. 2. Add the CMTS to the Provisioning Servers routing
| Info |
|---|
Step 2. is only required for Hosting your own Server. For Cloud Installation this will be done by the CMTS-Tunnel. |
Follow the instruction on CMTS "Routing / IPs" and add these lines in your /etc/sysconfig/network-scripts/route-... file
1.2.1. Restart Network
| Code Block | ||
|---|---|---|
| ||
systemctl restart network |
NOTE: if red lines / errors appear: this means that there is a route in your route file missing or miss configured. You should (MUST) fix this!
1.3. 3. Check CMTS IP Bundle IPs
Check if the CMTS has the required Bundle IPs like proposed by this section. No red lines means everything is okay and reachable:
1.4. 4. Add SSH key
| Code Block |
|---|
crypto key generate rsa general-keys modulus 1024 |
1.5. (5. optional: change shared secret)
NMS PRIME default shared secret is "DOCSIS". Changing this is recommand for production systems, since it is a security threat using default here. To change this do:
change the key in /tftpboot/keyfile. The key in the file will be used, to encrypt all DOCSIS configfiles.
change shared secret statement inside the CMTS
Code Block interface cable <...> cable shared-secret 7 <the secret>See for further Informations on Cisco CMTS's: https://www.cisco.com/c/en/us/td/docs/cable/cmts/config_guide/b_cisco_cmts_scg/b_cisco_cmts_scg_chapter_0111101.pdf
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|