Skip to end of banner Go to start of banner

Firewall Installation Rules

Skip to end of metadata

Created by Torsten Schmidt, last modified on Nov 08, 2017

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Firewall basic setup in: https://raw.githubusercontent.com/schmto/nmsprime/dev/Install/after_install.sh

#
# firewalld
#
# enable admin interface
firewall-cmd --add-port=8080/tcp --zone=public --permanent
firewall-cmd --reload

Firewall Provisioning should be done here: https://github.com/schmto/nmsprime/blob/dev/modules/ProvBase/Install/after_install.sh

No labels