1. Load CMTS default blade

Goto Provisioining –> CMTS

See the Assigned Config Blade

• Follow Setup Blade for a first default config
  Image Removed

2. Add Provisioning Server routing

Follow the instruction on CMTS Routing blade and add these lines in your /etc/sysconfig/network-scripts/route-... file

Image Removed

NOTE: if red lines / errors appear: this means that there is a route in your route file missing or miss configured. You should (MUST) fix this!

Image Removed

Adapt default settings

You can adapt CMTS config default settings, by using the following enviroment statments in /etc/nmsprime/*.env files

...

See:

Image Removed